Integrated Tool Chain for Model-based Design of Cyber-Physical Systems

The aim of INTO-CPS project is to create an integrated “tool chain” for comprehensive Model-Based Design (MBD) of Cyber-Physical Systems (CPSs). The tool chain will support the multidisciplinary, collaborative modelling of CPSs from requirements, through design, down to realisation in hardware and software. This will enable traceability at all stages of the development.

INTO-CPS will support the holistic modelling of CPSs, allowing system models to be built and analysed that would otherwise not be possible using standalone tools. We will integrate existing industry-strength tools with high Technology Readiness Levels (TRL 6–9) in their application domains, based centrally around Functional Mockup Interface (FMI)-compatible co-simulation. The project focuses on the pragmatic integration of these tools, making extensions in areas where a need has been recognised. The tool chain will be underpinned by well-founded semantic foundations that ensures the results of analysis can be trusted.

The tool chain will provide powerful analysis techniques for CPSs, including connection to SysML; generation and static checking of FMI interfaces; model checking; Hardware-in-the-Loop (HiL) and Software-in-the-Loop (SiL) simulation, supported by code generation. The tool chain will allow for both Test Automation (TA) and Design Space Exploration (DSE) of CPSs. The INTO-CPS technologies will be accompanied by a comprehensive set of method guidelines that describe how to adopt the INTO-CPS approach, lowering entry barriers for CPS development.


No articles found in this list

Press clippings

2015.02.18 | Knowledge exchange

Projets des membres - Projet INTO-CPS (H2020- ICT 1 2014)

Source: Systematic Paris Region website, February 2015 (French).

2015.02.18 | Knowledge exchange

Lancement du projet européen INTO-CPS avec deux entreprises membres du Pôle, ClearSy et Softeam

Systematic Paris Region website, 10 February 2015 (French).


2017.02.17 | Knowledge exchange

New member of the academic follower group

The Silesian University of Technology, Poland has joined the INTO-CPS academic follower group.

2017.02.06 | Knowledge exchange

New member of the academic follower group

Copenhagen School of Marine Engineering and Technology Management, Denmark has joined the INTO-CPS academic follower group.

2017.02.01 | Knowledge exchange

New member of the industry follower group

John Deere in Germany has joined the INTO-CPS industry follower group.

Showing results 7 to 9 of 44

Previous 1 2 3 4 5 6 7 8 9 10 Next

Project intranet and handbook

If you are an INTO-CPS partner, you can access the project intranet by clicking on the link below.

In the project handbook, the rules and guidelines for the project are described. Project partners can access the handbook on the project SVN in the folder T7.1 under WP7.